The fifth of November is Phoenixflame Creations’ birthday – remember it! 😉
In celebration, we’re releasing a toy designed after our favorite mythological creature… the Kitsune!
[Bet you were expecting Phoenix, weren’t you?]
Kouya the Kitsune is a tricky fellow and a masterful shapeshifter. He’s slow to trust but exceptionally loyal once you’ve gotten through the ice. Then he’s a lifelong companion, no matter how difficult the road ahead.
This model is intended to become a full size penetrable, but for the time being, he is being released in Micro-size only. It wouldn’t be a PFC penetrable without copious amounts of swearing, endless complications and prolonged beta phases, after all.
The fellows you see in the top picture can all be found in our shop, along with a few Micro Rei (some of which are “sibling” pours) and Mini Carmelas. It’s a mini-penetrable party!
Happy April Fool’s/Easter, and please give a warm welcome to our most ambitious project yet: Carmela the Aberration!
This snake-tailed chimeric companion isn’t just a cool looking insertable, she’s a penetrable as well! While she will not replace a standard-sized stroker – the Medium sized one has a depth of about 3.25 inches- it’s still quite the novel experience to have a 2-in-1 fantasy toy and she’ll make every inch count.
For now, Carmela comes in three sizes: Mini, Small, and Medium. The latter size will accommodate the average penis, but the other two are better suited to other purposes. You can use the orifice as a vibe holder, or use it for external suction… the possibilities are endless!
From the brilliant mind ofPigment Peach comes Valentine the Werewolf, brought to (silicone) life by
Phoenixflame Creations! Perhaps we could have just gone with the tongue,
but we thought you might prefer the whole package. 😉
“Are you serious, another werewolf?!” you might be thinking.
Well, Valentine
was something of an unexpected acquisition, but one we are thrilled to share with you
nonetheless! We think that even if we have sort of hit Critical Werewolf Mass (is there really such a thing?), Valentine’s assets bring something new not just to our table, but to canine models in general.
And what better time to introduce a character named
Valentine than on Valentine’s Day?
Re-sculpting Valentine while
keeping him relatively faithful to the original clay work was a challenge,
but one we think will be worth it… because that means you can get him
in more than one size! Valentine launches today with Small and Medium
sizes, and if he proves popular, this size range will expand like the
others.
Of course, there’s also a Valentine Desk Guardian… and with him comes Archie the Centaur! We weren’t going to leave our bumbling little horsemanfish out of the holiday of love.
Last but definitely not least… to top off our Valentine’s Day
celebrations, we’re bringing back a favorite from the past: Sweetheart
and Lonely Forever Desk Guardians!
We had some issues before with
the occasional piece of heart-shaped glitter escaping its confines, but
not anymore! We’ve totally revisited how we make this Limited Edition
coloration, and now it contains 100% platinum silicone hearts. They’re
rather time consuming to make and accordingly are in short supply, so
don’t wait – while a very small restock is possible, it is by no means
guaranteed!
Both colors feature heat-changing pigment that goes from color to clear at approximately 86 degrees Fahrenheit. When these guys go clear, it reveals the colorful hearts within.
Finally, we’ve dropped a few premade Valentines – both the tongue and cock models – in addition to a handful of mystery custom slots. Stop on by and check it out at: https://www.etsy.com/shop/phoenixflameforge
Please give a warm (if tentative) welcome to Archippos (”Archie”) the Centaur! He’s a rare sort known as an Ichthyocentaur, the aquatic elements of which influenced his design.
We were overdue for an equine-inspired toy and for a long time I racked my brain thinking of ways to do it so it wasn’t just another horse… and this is the end result! I really hope you all will enjoy him as much as I enjoyed designing him, and that he will be able to bring flared toys to people who aren’t fans of the traditional horse.
Archie is not available for purchase at this exact moment, but when I post about my winter colors, there should be some listings open for the small version of Archie. The Medium and Large are still pending – things have been chaotic, to say the least, but I will get to them (and the remakes of Medium and Large Hati) as soon as I can. This is likely to end up happening in early January, as the shop will be going on vacation for about a week starting on the 24th.
We’re okay! No damage to the house/workshop. One of the little horse huts in the field lost its top and the oldest barn had part of the roof come up a little… there are lots of branches down but nothing huge, and all the living things out here are fine. We also miraculously have power! Hooray for AC!
The shop will remain closed for a time, however, because the roads are currently impassable due to fallen branches and flooding. I imagine packages may get delayed even once local issues are cleared, because other areas of the state got hit way worse than we did.
Thank you to everyone who sent well-wishes, and to everyone else who was in Irma’s path, I hope you all are safe! ❤
It’s taken three attempts, but finally I have printed the first iteration of the new dragon hand model! I’ll get more specific measurements later, but the total height of this is just about 6″ (or it should be, because that’s what I specified to my printer!). Usable is significantly less, although it’s also difficult to define because technically there are multiple usable parts! Either way, pretty sure the total mass of this is going to put it on the larger end of my Medium category.
Now it is time to sand like the wind and get this prepared for molding!
It’s about half an inch bigger than a squishy and surprisingly, occupies a considerably higher volume of silicone! It’s pretty amazing how much of a difference that .5 inch makes.
It’s also priced higher because:
-Complex mold that usually wrecks the master print in order for me to extract it safely without damaging the mold. Printing material used is neither cheap nor fast to replace.
-Individually poured in a unique firmness not used on dildos, whereas Guardians/Dicklets are generally made alongside other products. More time spent overall on each Rei… virtually identical to any other two color, full size toy!
-Rei is both slightly larger and heavier than two pocket penetrable models I own from another company, priced only slightly higher than a single-color toy from said company.
-Danger of breaking mold core (thus forcing me to discard a solid silicone mold) every time I cast a Rei. I broke one after just two castings.
Circumference of Head- 5.25
Circumference of widest point of shaft-7 inches
Circumference of widest point of knot- 8 inches
I kinda made this with the intent of a gradual increase in size to the knot. So hopefully I’ve succeeded in making something thick, but comfortable. I’ll order some silicone during the summer. I’ll be sculpting some more things in the meantime.
I strongly doubt that I will have my April Fool’s thing done for the actual day. I still want to release it for a limited time, however, and see how it’s received. If people actually like it, it could become a permanent addition.
I’m also doubtful that my Easter plans will come to fruition, but I do still want to release it belatedly if I can. I’d say “as a generic spring event” but it involves tiny Easter “baskets” so it’s not that generic.
Take all of this with a grain of salt. The only near-certainty is delays, though it’s possible I may not do these events at all, depending on how the family situation goes.
With that out of the way, I’d like to take a moment to just say one more thing:
Thank you so much to all of you who have sent my family well-wishes and support. These are incredibly hard times, but your kind words mean more to us than you know.
I never thought I would utter a phrase remotely like: “Hey, Grandma, there’s a bunch of people on my sex toy shop’s blog sending you their love and wishing you well”, but that’s a thing that’s happened. Y’all are the best.
The Dicktionary 